Referance: Full-Monero-Node on Linux

---

Full-Monero-Node on Linux

---

Referance: 

Photo by Bruno Glätsch

With the rise of cryptocurrencies, financial privacy has become a hot topic.

Monero is currently the best in the field thanks to the fairly big anonymity set, mandatory privacy for all transactions, ring signatures, Ring CT, stealth addresses, and the future Kovri anonymization network.
Although Monero developers have mitigated most, if not all, privacy risks associated with connecting your wallet to a 3rd party node, to get a piece of mind it's recommended to run your own full node.

In this article, I'll go through steps to install and set up monero on Linux, mainly the latest Ubuntu 18.04 bionic.
However, the steps should be the same for any Debian-based distribution using systemd and fairly similar for other distros with the exception of the package manager (apt).
Sorry, no Mac or Windows.

1 Update the operating system

First, update the system packages:

sudo apt update && sudo apt-get upgrade

2 Install dependencies

Make sure you have git installed. If not, do it now:

sudo apt install git

Install the rest of dependencies:

sudo apt install build-essential cmake doxygen graphviz miniupnpc pkg-config libboost-all-dev libcurl4-openssl-dev libgtest-dev libminiupnpc-dev libreadline-dev libssl-dev libunbound-dev libunwind8-dev libzmq3-dev libzmq3-dev libpgm-dev libsodium-dev

Unfortunately, libgtest-dev doesn't come as binary on Ubuntu, so you'll have to compile it yourself:

cd /usr/src/gtest 
sudo cmake . 
sudo make -j2
sudo mv libg* /usr/lib/

How to Create a Monero Paper Wallet to Secure Your Coins

3 Download and build Monero

Create source directory if you haven't already:

mkdir ~/source
cd ~/source

Clone the repository and its submodules:

git clone --recursive https://github.com/monero-project/monerocd monero
make -j2 release # -j4 for 4 threads etc

It may take a while to compile depending on your machine.
When finished, copy all the binaries to /usr/local/bin:

sudo cp ./build/release/bin/* /usr/local/bin/

Top 5 Reasons Monero Will Become the Most Widely Used Private and Anonymous Cryptocurrency

4 Set up the service

I've written a systemd service that automatically starts the node after a reboot or when crashed.

cd /lib/systemd/system
sudo wget https://gist.githubusercontent.com/mariodian/b8bb62de8f5aa5466cccb17f280f439e/raw/db0a98573e0a8cc871781d8d43f03437ca159e22/monerod.servicesudo chmod 644 monerod.service

Make sure to edit the file to match your environment.
You may want to raise block-sync-size to a higher number if you run on a decent hardware or omit it completely and let the daemon decide automatically.
My node failed to keep up with the chain height after the April's fork so I had to set it manually.
Next, create a config file:

mkdir ~/.bitmonero
cd ~/.bitmonero
touch monerod.conf

and add the following lines:

echo "data-dir=/home/satoshi/.bitmonero" >> monerod.conf
echo "log-file=/home/satoshi/.bitmonero/monero.log" >> monerod.conf
echo "log-level=0" >> monerod.conf

If you want to be able to connect your wallet from another machine, add the following:

echo "rpc-bind-ip=0.0.0.0" >> monerod.conf
echo "rpc-bind-port=18081" >> monerod.conf
echo "rpc-login=veryLongAndRandomUsername:veryLongAndRandomPassword" >> monerod.conf

Don't forget to change rpc-login to your own one.

5 Run the service

Enable the systemd config and start the daemon:

sudo systemctl enable monerod
sudo service monerod start

You can check the progress with:

tail -f monero.log

or using a simpler output:

monerod --config-file /home/satoshi/.bitmonero/monerod.conf status

The synchronization may take from a few hours to a few days depending on your hardware.
Please be patient.

6 Allow incoming connections (optional)

You can allow two types of incoming connections to your node: P2P and RPC.
The first one lets other nodes download the chain from you. The latter lets a wallet connect to your node and retrieve info about its balance, transactions etc.
For the P2P connection run this command:

sudo iptables -I INPUT -p tcp --dport 18080 -j ACCEPT

For the RPC:

sudo iptables -I INPUT -p tcp --dport 18081 -j ACCEPT

Save the rules permanently:

sudo iptables-save

If you're behind a router, you will have to forward the ports to your machine.
Please refer to your router's manual.

7 Connect to the node with your wallet

Now test your connection from your wallet.
If you use the GUI wallet go to Settings and fill out Address and Port.
Next, under Manage Daemon click Show Advanced and type in the RPC login you've set in ~/.bitmonero/monerod.conf earlier.

In case of using the command line wallet, you may start it with the following:

monero-wallet-cli --wallet-file /path/to/your/wallet --trusted-daemon --daemon-address ip.of.your.node:18081 --daemon-login veryLongAndRandomUsername:veryLongAndRandomPassword

Personally, I prefer the command line wallet because it's cleaner and all you need, most of the time, is really just 3 or 4 commands.

The ones that you will likely use the most are:

• show_transfers to view the list of all transactions
• integrated_address to get a receiving address containing a payment ID
• balance to view locked and unlocked balance
• transfer <address> <amount> to make a payment

Type help to access the list of all commands.

*****

As you can tell, setting up Monero full node from source is fairly easy if you have basic knowledge of the Linux command line.
Optionally, to make your node more secure and anonymous, you may want to run it behind torify or torsocks (essentially the same). Unfortunately, I haven't done it myself yet so you'll have to look elsewhere.
All in all, I hope you liked the tutorial.
Please let me know in the comments section below if you run into any issues.

We hope you like the post. Please share it with your followers. Thank you for your support!

Subscribe to our newsletter for weekly thoughts and tutorials. You'll receive a FREE e-book as a bonus!